3.1.4 Тип на поврзување со навојна спојка
Стандарден
ЗабелешкаChina Oxygen Storage Tank, Ln2 Storage Tank, We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products and solutions in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market.
DN10, 3/8″
Серија 300 од не'рѓосувачки челик
ASME B31.3
Притисок на дизајнот.
08 е 8 бари,
16 е 16 бари.
| VМатеријал на внатрешната цевка. | ДБ02508 | Препорачано ≤ DN25 или 1″. Или избира тип на поврзување со вакуумски бајонет со прирабници и завртки (од DN10, 3/8″ до DN80, 3″), тип на заварено поврзување (од DN10, 3/8″ до DN150, 6″) | Притисок на дизајнот: | |
| D е 316L, | Е е друго. | HLHS | Тип | 00X |
| DN15, 1/2″ | Б020 | Б020 | 00X | DN20, 3/4″ |
| HLHS | No | No | Б025 | 00X |
| Nominal Diameter of Inner Pipe | Препорачано од Enterprise Standard of HL Cryogenic Equipment. Исто така, може да се произведува според барањата на клиентот. | Препорачано ≤ DN25 или 1″. Или избира тип на поврзување со вакуумски бајонет со прирабници и завртки (од DN10, 3/8″ до DN80, 3″), тип на заварено поврзување (од DN10, 3/8″ до DN150, 6″) | Номинален дијаметар на надворешната цевка: | Препорачано од Enterprise Standard of HL Cryogenic Equipment. Исто така, може да се произведува според барањата на клиентот. |
| Design Pressure | Препорачано ≤ 16 бари. Или избира тип на заварена врска (≤40 бари) | 3.2 Динамички систем за цевки со вакуумска изолација | Без посебни барања, материјалот на внатрешната и надворешната цевка ќе биде избран исто. | 3.2 Динамички систем за цевки со вакуумска изолација |
| 3.2.1 Тип на поврзување со вакуумски бајонет со стеги | Номинален дијаметар на внатрешната цевка | Номинален дијаметар на внатрешната цевка | Тип | Номинален дијаметар на внатрешната цевка |
| Притисок во дизајнот | Материјал | |||
| на внатрешна цевка | Стандарден | |||
| Material | 300 Series Stainless Steel | |||
| Тип на поврзување со вакуумски бајонет со стеги за динамичко вакуумско изолирано флексибилно црево | LN2DN10, 3/8″28 бари | |||
Серија 300 од не'рѓосувачки челик
ASME B31.3
Материјал на внатрешната цевка.
| А е 304, Б е 304L, | C е 316, | |
| D е 316L, | Е е друго. | ХЛХ |
| ДБ01508 | DN15, 1/2″ | ХЛХ |
| ДБ02008 | Материјал на надворешната цевка | Материјал на надворешната цевка |
| ДБ02508 | Материјал на надворешната цевка | Материјал на надворешната цевка |
| Препорачано ≤ DN25 или 1″. Или избира тип на поврзување со вакуумски бајонет со прирабници и завртки (од DN10, 3/8″ до DN80, 3″), тип на заварено поврзување (од DN10, 3/8″ до DN150, 6″) | Материјал на надворешната цевка | Материјал на надворешната цевка |
| Притисок на дизајнот: | Материјал на надворешната цевка | Материјал на надворешната цевка |
Без посебни барања, материјалот на внатрешната и надворешната цевка ќе биде избран исто.
Состојба на напојување:
Локацијата треба да снабдува со енергија вакуумските пумпи и да ги информира HL Cryogenic Equipment за локалните информации за електрична енергија (напон и херци).
3.2.2 Тип на поврзување со вакуумски бајонет со прирабници и завртки
одел
Врска
Тип
Номинален дијаметар на внатрешната цевка
Притисок во дизајнот
Материјал
на внатрешна цевка
Стандарден
Забелешка
HDF010
00X
8~16 бари
DN10, 3/8″
8~16 бари
Серија 300 од не'рѓосувачки челик
ASME B31.3
Притисок на дизајнот.
08 е 8 бари,
16 е 16 бари.
Материјал на внатрешната цевка.
А е 304,
Б е 304L,
C е 316,
D е 316L,
Е е друго.
F015
00X
DN15, 1/2″
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Испрати барање: Подготвени да дознаете повеќе | DN10, 3/8″ | бенгалски
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| шпанскиНоминален дијаметар на надворешната цевка:X | DN15, 1/2″ | |||||
| шпанскиПрепорачано ≤ 16 бари. Или изберете тип на заварена врска (≤40 бари).X | DN20, 3/4″ | |||||
| шпанскиСостојба на напојување:X | DN25, 1″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1″. Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8″ to DN80, 3″), Welded Connection Type (from DN10, 3/8″ to DN150, 6″)
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Каннада
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Стандарден
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| шпански08 е 8 бари,00X | и 25, 32, 40. | DN10, 3/8″ | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| шпанскиСинди00X | DN15, 1/2″ | |||||
| шпанскитаџички00X | DN20, 3/4″ | |||||
| шпанскитајландски00X | DN25, 1″ | |||||
| шпанскиузбекистански00X | DN32, 1-1/4″ | |||||
| шпанскиКоса00X | DN40, 1-1/2″ | |||||
| шпанскиЗулу00X | DN50, 2″ | |||||
| шпанскиОрија00X | DN65, 2-1/2″ | |||||
| шпанскиF08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN150, 6″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Состојба на напојување:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
одел
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8″ | DN10, 3/8″ | Серија 300 од не'рѓосувачки челик | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| шпанскиDN15, 1/2″00X | DN15, 1/2″ | |||||
| шпанскиDN20, 3/4″00X | DN20, 3/4″ | |||||
| шпанскиDN25, 1″00X | DN25, 1″ | |||||
| шпанскиW03200X | DN32, 1-1/4″ | |||||
| шпанскиW04000X | DN40, 1-1/2″ | |||||
| шпанскиW05000X | DN50, 2″ | |||||
| шпанскиW06500X | DN65, 2-1/2″ | |||||
| шпанскиW08000X | DN80, 3″ | |||||
| HКинеска големопродажна Кина 195L 1.4MPa течност за заварување...00X | DN100, 4″ | |||||
| HБрза испорака за машина за течен азот во Кина...00X | DN125, 5″ | |||||
| HПаметен избор за00X | DN150, 6″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Брзи врски
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSОпрема за поддршка на цевководниот систем00X | Испрати барање: Подготвени да дознаете повеќе | DN10, 3/8″ | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| шпански+86 1809011164300X | DN15, 1/2″ | |||||
| шпанскифранцуски00X | DN20, 3/4″ | |||||
| шпанскируски00X | DN25, 1″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1″. Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8″ to DN80, 3″), Welded Connection Type (from DN10, 3/8″ to DN150, 6″)
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: дански
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Чешки
Африканс
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLерменскиX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8″ | бенгалски
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHфризискиX | DN15, 1/2″ | |||||
| HLHгуџаратиX | DN20, 3/4″ | |||||
| HLHхавајскиX | DN25, 1″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1″. Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8″ to DN80, 3″), Welded Connection Type (from DN10, 3/8″ to DN150, 6″)
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Каннада
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
латински
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLмарати00X | бурмански | DN10, 3/8″ | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDСинди00X | DN15, 1/2″ | |||||
| HLHDтаџички00X | DN20, 3/4″ | |||||
| HLHDтајландски00X | DN25, 1″ | |||||
| HLHDузбекистански00X | DN32, 1-1/4″ | |||||
| HLHDКоса00X | DN40, 1-1/2″ | |||||
| HLHDЗулу00X | DN50, 2″ | |||||
| HLHDОрија00X | DN65, 2-1/2″ | |||||
| HLHDF08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN150, 6″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
3.2.3 Welded Connection Type
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8″ | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2″ | |||||
| HLHDW02000X | DN20, 3/4″ | |||||
| HLHDW02500X | DN25, 1″ | |||||
| HLHDW03200X | DN32, 1-1/4″ | |||||
| HLHDW04000X | DN40, 1-1/2″ | |||||
| HLHDW05000X | DN50, 2″ | |||||
| HLHDW06500X | DN65, 2-1/2″ | |||||
| HLHDW08000X | DN80, 3″ | |||||
| HLHDW10000X | DN100, 4″ | |||||
| HLHDW12500X | DN125, 5″ | |||||
| HLHDW15000X | DN150, 6″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
3.2.4 Thread Joint Connection Type
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8″ | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2″ | |||||
| HLHDB02000X | DN20, 3/4″ | |||||
| HLHDB02500X | DN25, 1″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1″. Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8″ to DN80, 3″), Welded Connection Type (from DN10, 3/8″ to DN150, 6″)
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
It is a good way to improve our products and service. Our mission is to develop creative products to customers with a good experience for Factory Directly supply China 2000L/1.6/2.6/3.4MPa LNG Storage Tank Liquid Nitrogen Argon CO2 Cylinder Storage, In a word, when you choose us, you choose a ideal existence. Welcome to visit our factory and welcome your get! For even further inquiries, remember to usually do not hesitate to make contact with us.
Factory Directly supply China Oxygen Storage Tank, Ln2 Storage Tank, We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products and solutions in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market.
